Soft ADA Trap Cover Slim-Fit Design for sleeker fit.
Fast and easy installation with a high gloss PVC finish. Valve & Supply covers flex 360° for braided supplies.
Product set carousel
Black
Product set carousel
Almond
Product set carousel
Gray
Product set carousel
Product Details
Trap Gear offers a superior high-gloss finish, Flame & Smoke Rated material, and a soft, flexible, anti-fungal, anti-microbial PVC system that is easy to install with Velcro fasteners.The Slim Fit design with a narrow, sleek look can be cut-to-fit for even more custom sizing. The slim dimensions can still fit 1-1/4” traps for an ADA compliant and professional-looking installation.
Non-sewn, fusion-bonded molded technology allows installers to custom “cut-to-size” leaving finished edges on material that won’t unravel for permanent, professional installations.
Valve and Supply Covers can flex a full 360° for installations over braided supplies and can also be trimmed to fit to any length.
Features
- Modern Design/Slim Fit
- PVC UV Inhibited, Anti-Microbial, Anti-Fungal
- Fits Great on 1-1/4" Traps, Flexible Braided Supplies
Size Guide
Color Options
Easy Installation
- Measure and cut to length.
- Fit TRAP-GEAR Cover over P-Trap or Valve & Supply.
- Press Internal Velcro* Strips together.
- For Extra Tamper Resistance, press and lock “Snap Fasteners” together through pre-punched holes.
- For Adjustable (tighter) Fit, align “Snap Fasteners” where needed on each side of material, punch hole with “Snap Fastener”, press and lock together.
Model Numbers
| Part Number | Available Kits & Single Piece Products |
|---|---|
| 350 | 1 P-Trap, 1 Valve & Supply Cover |
| 396 | 1 P-Trap, 2 Valve & Supply Covers |
| 427 | 1 P-Trap, 2 Valve & Supply, 1 Offset Covers |
| 307 | 1 P-Trap Cover |
| 327 | 1 Valve & Supply Cover |
| 304 | 1 Offset Cover |
POP Bag
Approved Material Testing
- ASTM E84 – Flame and Smoke
- ASTM G21 – Anti-microbial and Anti-fungal
- ASTM G153 – Weatherization and UV Exposure
- ASTM E96 – Moisture Permeability
- ASTM D570 – Tensile Strength
- ASTM C177 - Thermal Conductivity & Thermal Resistance
- ASTM C158 - Thermal Conductivity & Thermal Resistance
- UPC/IAPMO PS 94-2012 (Heat Penetration & Water Resistance)
Codes & Standards Compliance
- ADA 4.19.4/ABA 606.5 rev.
- ICC/ANSI A 117.1 (sec. 606.6)
- Meets 2015/2018/2021 IPC 404.3, UPC 403.3 & SPC Plumbing Codes
- Meets Code Required ASTM C1822 (Type I) Fire Smoke Rated Material
- Meets ASME A112.18.9
- UPC/IAPMO PS 94
Soft ADA Trap Cover Slim-Fit Design for sleeker fit.
Fast and easy installation with a high gloss PVC finish. Valve & Supply covers flex 360° for braided supplies.
Product set carousel
Black
Product set carousel
Almond
Product set carousel
Gray
Product set carousel
Product Details
Trap Gear offers a superior high-gloss finish, Flame & Smoke Rated material, and a soft, flexible, anti-fungal, anti-microbial PVC system that is easy to install with Velcro fasteners.The Slim Fit design with a narrow, sleek look can be cut-to-fit for even more custom sizing. The slim dimensions can still fit 1-1/4” traps for an ADA compliant and professional-looking installation.
Non-sewn, fusion-bonded molded technology allows installers to custom “cut-to-size” leaving finished edges on material that won’t unravel for permanent, professional installations.
Valve and Supply Covers can flex a full 360° for installations over braided supplies and can also be trimmed to fit to any length.
Features
- Modern Design/Slim Fit
- PVC UV Inhibited, Anti-Microbial, Anti-Fungal
- Fits Great on 1-1/4" Traps, Flexible Braided Supplies
Size Guide
Color Options
Easy Installation
- Measure and cut to length.
- Fit TRAP-GEAR Cover over P-Trap or Valve & Supply.
- Press Internal Velcro* Strips together.
- For Extra Tamper Resistance, press and lock “Snap Fasteners” together through pre-punched holes.
- For Adjustable (tighter) Fit, align “Snap Fasteners” where needed on each side of material, punch hole with “Snap Fastener”, press and lock together.
Model Numbers
| Part Number | Available Kits & Single Piece Products |
|---|---|
| 350 | 1 P-Trap, 1 Valve & Supply Cover |
| 396 | 1 P-Trap, 2 Valve & Supply Covers |
| 427 | 1 P-Trap, 2 Valve & Supply, 1 Offset Covers |
| 307 | 1 P-Trap Cover |
| 327 | 1 Valve & Supply Cover |
| 304 | 1 Offset Cover |
POP Bag
Approved Material Testing
- ASTM E84 – Flame and Smoke
- ASTM G21 – Anti-microbial and Anti-fungal
- ASTM G153 – Weatherization and UV Exposure
- ASTM E96 – Moisture Permeability
- ASTM D570 – Tensile Strength
- ASTM C177 - Thermal Conductivity & Thermal Resistance
- ASTM C158 - Thermal Conductivity & Thermal Resistance
- UPC/IAPMO PS 94-2012 (Heat Penetration & Water Resistance)
Codes & Standards Compliance
- ADA 4.19.4/ABA 606.5 rev.
- ICC/ANSI A 117.1 (sec. 606.6)
- Meets 2015/2018/2021 IPC 404.3, UPC 403.3 & SPC Plumbing Codes
- Meets Code Required ASTM C1822 (Type I) Fire Smoke Rated Material
- Meets ASME A112.18.9
- UPC/IAPMO PS 94